Creighton Side Saddle – Continued

When we last left the Creighton side saddle, it was in a sorry state.  It had been brought to the Ford Conservation Center for treatment in hopes that it could be stabilized and returned to a condition that could be displayed and stored safely for the long-term.

 

Side saddle before treatment, damage to saddle blanket and leather parts

The Creighton Saddle Before Treatment.

As with all objects that are brought to the Ford Center for treatment, before any work could begin, “Before Treatment” photos were taken to document the condition of the saddle.  These photos show the overall condition as well as details of areas with significant damage.  Tests were carried out to determine if the coating and stains on the various components of the saddle were soluble in our standard array of organic solvents.  Because of potential pest damage and the presence of insect casings, the saddle was wrapped around a cushion for support (in this case a moving blanket), wrapped in plastic sheeting, and placed in the deep freezer for a few days to kill any creepy crawlies.  It was then thawed for another day or two and frozen again to kill anything that might have hatched after the first freezing.  Now that it was free of anything living, loose dirt and grime, and any insect remnants were removed with a low-suction HEPA vacuum and a soft brush. Lightly dampened swabs were used to remove additional dirt.

 

Saddle supported and tied to blankets, ready to be wrapped in plastic for freezing cycle.

Saddle supported and tied to blankets, ready to be wrapped in plastic for freezing cycle.

In order to access the underside of the saddle during treatment, a special sling was created so the saddle could be placed upside down. The sling mount was created from PVC pipe and Tyvek spunbonded polyethylene fabric.  Once in the sling, the saddle pads beneath the leather flaps could be vacuumed and repaired.  Powdery white mold on the leather side of the saddle pads was reduced using ethanol.

 

Sling support to access the underside of the saddle. Conservator vacuums the saddle.

The sling support made to access the underside of the saddle.  Here Objects Conservator, Rebecca, vacuums the saddle.

Large tears and holes in the canvas of the saddle pads were repaired using washed muslin toned with a dilute acrylic paint to match the surrounding textile.  The edges around the holes were stabilized with an adhesive and the mends were attached using cotton thread, dyed with tea and rinsed thoroughly with deionized water. Tears in the leather side of the saddle pads were stabilized using goldbeater’s skin coated with a heat-activated adhesive and applied using a heated tacking iron.  Goldbeater’s skin is a flexible transparent material made from animal intestine, traditionally used in making gold leaf and to repair parchment, vellum and leather objects The saddle pads were re-stitched where the original cotton thread had degraded using embroidery floss toned with acrylic paint and using the existing stitch holes.

 

 Toned muslin patch shown next to whole where it will be sewn.   

(Left) Toned cotton muslin patch that will be tucked under the whole and stitched in place to prevent further loss of original material.  (Right) Restitching the saddle pads using toned embroidery floss and using the original stitch holes.

The deformed skirts and flaps were humidified using dampened blotter paper wrapped in Gore-Tex microporous fabric, which lets moisture vapor pass through without wetting the leather.  The leather was humidified under light weights overnight.  This process was repeated several times until the skirts were returned to their proper shape.

Severe tears on the proper right saddle flap were stabilized using goldbeater’s skin coated with a heat-activated adhesive.  A large section was adhered to the back of the flap to stabilize the pieces.  Small losses were filled with adhesive and covered with small tabs of goldbeater’s skin. All goldbeater skin repairs were inpainted using a mineral spirit based acrylic paint.  Water-soluble residues were removed from the proper left saddle flap using deionized water on cotton swabs.  White paint splatters were reduced using acetone.

 

Sheet of goldbeater's skin held to show transparency, fingers visible through surface

Made out of the outside membrane of ox intestine, goldbeater’s skin is used in the production of gold leaf and is an excellent material for repairing leather.

Technician holds up leather flap showing large patch of goldbeater's skin on reverse.     Front of flap showing repair to tear using goldbeater's skin and adhesive

(Left) Technician Megan Griffiths holds up the leather flap to show large goldbeater’s skin patch on the back side.  (Right) The front of the flap showing the repair to the tear.

Flaking leather and areas where the epidermis had been lost were consolidated and losses were toned using paste wax mixed with dry pigments.  A light coating of toned paste wax was applied to the painted elements on the flaps, which had faded over time.  The saddle flaps and skirts were coated overall with a mixture of paste wax and dry pigments.

 

Proper left flap with the right side treated with toned wax.

Proper left flap showing the before and after of toning with wax and dry pigments.

Corrosion on all accessible metal components was mechanically removed using ground up corn cob abrasives in an air abrasive unit (much like a small sand-blasting machine).  They were then degreased and coated with clear paste wax and buffed. After treatment, the iron stirrup was stored separately, in a bag within the saddle mount.  It was not possible to attach the stirrup to its original strap because the strap is too fragile and an unknown length of it is missing.

Now, see the final results!

Become a Member!

Our members make history happen.

Join Now

You May Also Enjoy

The Story of Omaha Police Fingerprint Expert Emily Byram

The Story of Omaha Police Fingerprint Expert Emily Byram

Marker Monday: Cather Childhood Home

Marker Monday: Cather Childhood Home

Yutan Tornado – March 23, 1913

Yutan Tornado – March 23, 1913

About History Nebraska
History Nebraska was founded in 1878 as the Nebraska State Historical Society by citizens who recognized Nebraska was going through great changes and they sought to record the stories of both indigenous and immigrant peoples. It was designated a state institution and began receiving funds from the legislature in 1883. Legislation in 1994 changed History Nebraska from a state institution to a state agency. The division is headed by Interim Director and CEO Jill Dolberg. They are assisted by an administrative staff responsible for financial and personnel functions, museum store services, security, and facilities maintenance for History Nebraska.
Explore Nebraska
Discover the real places and people of our past at these History Nebraska sites.

Upcoming Events

View our new and upcoming events to see how you can get involved.

Become a Member

The work we do to discover, preserve, and share Nebraska's history wouldn't be possible without the support of History Nebraska members.

Latest Hall of Fame Inductee

The Nebraska Hall of Fame was established in 1961 to officially recognize prominent Nebraskans.

Listen to our Podcast

Listen to the articles and authors published in the Nebraska History Magazine with our new Nebraska History Podcast.

Nebraska Collections

History Nebraska's mission is to collect, preserve, and open our shared history to all Nebraskans.

Our YouTube Video Collection

Get a closer look at Nebraska's history through your own eyes, with our extensive video collections.

Additional Research Resources

History Nebraska Research and Reference Services help connect you to the material we collect and preserve.

Support History Nebraska
Make a cash donation to help us acquire, preserve, and interpret Nebraska’s history. Gifts to History Nebraska help leave a legacy and may help your taxes, too! Support the work of History Nebraska by donating to the History Nebraska Foundation today.

Volunteers are the heroes of History Nebraska. So much history, so little time! Your work helps us share access to Nebraska’s stories at our museums and sites, the reference room, and online.